#Home security camera install
#Home security camera manual
#Home security camera upgrade

The name of the app displayed on your device should be taken as the default. The app is referred to as Xiaomi Home app in Europe (except for Russia). Open Mi Home/Xiaomi Home app, tap “+” on the upper right, and then follow prompts to add your device.

#Home security camera install

Or search “Mi Home/Xiaomi Home” in the app store to download and install it. You will be directed to the connection setup page if the app is installed already. Scan the QR code to download and install the app. Control your device with Mi Home/Xiaomi Home app. This product works with Mi Home/Xiaomi Home app. Install Mi Home appĬonnect with Mi Home/Xiaomi Home App. Data stored on the MicroSD card is not deleted. Press and hold the Reset button to restore your device to factory settings. Please use a genuine Micro SD card manufactured by a qualified supplier, with a reading/writing speed of no less than U1/Class 10. Please turn off the IMILAB Home Security Camera A1‘s power supply before inserting or removing the MicroSD card. Adjust the camera lens upward until the MicroSD slot is revealed, then insert the MicroSD card into the slot (the side with contact points must be facing down). Make sure that the power to IMILAB Home Security Camera A1 is already disconnected.

#Home security camera upgrade

Steady blue on: connected/device status is normalįlashing orange rapidly: waiting for connectionįlashing orange slowly: system upgrade in progress If the camera position is incorrect, adjustments can be made through the app.

Once the IMILAB Home Security Camera A1 is turned on, please do not attempt to rotate its head by force.

If you do not see a flashing orange light, please press and hold the Reset button to restart the device to enter pairing mode.

If the indicator light is flashing orange, that means the device is activated successfully.

IMILAB Home Security Camera A1 will automatically activate once the power cable is inserted into the Micro-USB charging port. When mounting the security camera on a wall: Please note that the wall must be able to support at least triple the product’s total weight. Warning: To avoid any damages or injuries, the device must be securely fastened to the Ceiling/wall as specified in the installation instructions. Press down until the two surfaces are flush, then turn the camera unit in either direction to lock it in position.

Matching the grooves on the bottom of the camera unit with the raised area on the base unit.

Secure the base unit in place by tightening the screws into the plastic anchors. Make sure to position the base unit so that the arrow is pointing up.

Insert the two plastic anchors into the holes on the wall.

The diameter of each hole is approximately 6 mm, and the depth is approximately 25 mm. It is recommended that you mark the locations of the hole with a pencil before drilling.

Drill two holes on the wall by using the base of the IMILAB Home Security Camera A1 as a template.

Mounted IMILAB Home Security Camera A1 on a Wall IMILAB Home Security Camera A1 can be placed on a number of horizontal surfaces, such as a writing desk, dining table, and coffee table.

#Home security camera manual

Package Contents: IMILAB Home Security Camera A1, power cable, wall mounting accessories pack, user manual Installation